How To Determine Arrow Length

This could only be caused by trying to fire an arrow that was too short. So if your draw length is 28″, you should get arrows with a maximum length of 29″.

How to Determine Your Draw Length for Archery Bow

I prefer determining proper draw length with this method because the flat wall aids the person in standing upright and is much easier to see, then correct, scrunched shoulders or an expanded chest.

How to determine arrow length. The standard way to measure arrow length is from the back of the point to the throat of the nock. So, an arrow numbered 350, bends.350” when the weight is applied. You simple take your draw length and add 0.5″ up to a maximum 1″ to determine appropriate arrow length.

To measure your draw length, stand with your back to a wall stretching your arms out against the wall. The arrow must be 28” in length and supported at each end of the arrow. To determine the arrow length you simply need to hold up the bow and draw the bowstring back to your chosen anchor point, your friend will then need to measure from the string to the front of the riser.

A peak weight is the maximum amount of weight that you can pull when drawing your bow. To calculate this, arrows must be 29” long and supported at two points 28” apart. Before we dive into this issue, we should briefly discuss how the draw length of a bow is measured.

In order to choose the right arrow with the correct spine rating for you, you need to know three things: The shaft is the component that you measure to determine the length of the arrow. The draw length of the bow, the type of bow you have, and the position of your arrow rest.

The best method of determining correct archery arrow length requires a bow with a light draw weight and an extra long arrow. You need to know your peak weight. The number of inches the arrow bends multiplied by 1,000 is the arrow’s spine.

Using the same bow with the same arrow, shoot the bow at different draw lengths. Given a specific arrow spine, an arrow that is shorter will be more rigid than a shaft of the same spine that is longer. Your draw length and arrow spine will influence your arrow length.

For many people, wingspan is generally the same length as height. For example, a 500 spine arrow bends.5 inches when the weight is applied. You need to know what your ideal arrow length is.

You’re using a compound bow so you couldn’t have overdrawn. This can also be measured from the front most part of the grip to the corner of the string. To determine your draw length without a bow, you can use the following calculated draw length:

Spine is measured by the number of inches a shaft deflects (bends) x 1000. Required arrow length` the proper length for your arrow will depend upon several factors: Record this measurement (in inches) as arm span.

Matching an arrow to a bow arrow spine, arrow weight, and arrow length are all important factors in matching an arrow to a bow. Draw length is the distance from the nock point to the throat of the grip plus 1 3/4. To get your draw length, divide your wingspan by 2.5 wingspan / 2.5 = draw length

Typically, this length will also be about the same length of arrow needed by the compound archer. With your arms stretched straight out to your sides, measure from the tip of one middle finger to the tip of the other middle finger. If you know your draw length, you can simply add either 1 or 2 inches to this to approximate your arrow length.

Record this measurement as arm span. So if your draw length is 28″, you should get arrows with a maximum length of 29″. What is the easiest and safest way to determine the proper arrow length?

On compound bows, each bow is set at a particular length and the bow should always be fired from that set length. It is the base of your arrow… A painful accident like this can easily be avoided.

For each draw length, record the draw weight on the fingers and the resulting arrow speed. In order to find your ideal arrow length simply find your draw length plus.5” to 1”. Once they have this measurement, they will then want to add an extra half an inch.

The longer the arrow shaft, the more it will flex. For example, if you have a 60 lb. It is a long piece of material from the tip to the nock.

This directly relates to arrow “bend.”. This length is measured from the front of the berger hole (where the arrow rest mounts to the riser) to the corner or angle of the string. Without the ability to measure joules, there is another way you can determine which draw length is most efficient.

These three things need to be matched so that you, the archer, have the best chance of hitting their target.

What is a Bow Square & Why You Need One? Archery, Spines